The Texas Instruments LMX2594 is a high-performance, wideband PLL with integrated VCOs that can generate any frequency from 10MHz to 15GHz without using an internal doubler, thus

Products | 04-08-2017

Texas Instruments has opened the door for developers to implement high-performing DLP display technology with virtually any low-cost processor. The new 0.2inch DLP2000 chipset and

Products | 03-08-2017

The AMC1306 device, from Texas Instruments, is a precision, delta-sigma (?S) modulator with the output separated from the input circuitry by a capacitive double isolation barrier t

Products | 02-08-2017

The Texas Instruments ADS8578S device is an eight-channel, integrated DAQ system based on a 14-bit SAR ADC. All input channels are simultaneously sampled to achieve a maximum throu

Products | 01-08-2017

The Texas Instruments TLV854x ultra-low-power operational amplifiers (op amps) are intended for cost-optimized sensing applications in wireless and low-power wired equipment. This

Products | 31-07-2017

The Texas Instruments’ TIOS101 devices are configurable as high-side, low-side or push-pull drivers. These devices are capable of withstanding up to 1.2kV (500ohm) of IEC 61000-4-5

Products | 27-07-2017

The Texas Instruments UCC27712 is a 620V high-side and low-side gate driver with 1.8A source, 2.8A sink current, targeted to drive power MOSFETs or IGBTs. The recommended VDD o

Products | 26-07-2017

The Texas Instruments HDC2010 is an integrated humidity and temperature sensor that provides high accuracy measurements with very low power consumption, in an ultra-compact WLCSP (

Products | 25-07-2017

The Texas Instruments OPAx196 family (OPA196, OPA2196, and OPA4196) is a new generation of 36V, rail-to-rail e-trim op amps. These devices offer very low offset voltage (±25µV,

Products | 24-07-2017

Texas Instruments’ TAS2505-Q1 is a mono Class-D speaker amp that supports both Digital and Analog inputs. The device is ideal for automotive instrument cluster, emergency call (eCa

Products | 21-07-2017

Texas Instruments has introduced a pair of highly flexible, single-chip buck-boost battery charge controllers for on to four-cell (1S to 4S) designs. The bq25703A and bq25700A sync

Products | 20-07-2017

The TIOL111 family of transceivers, from Texas Instruments, implements the IO-Link interface for industrial bidirectional, point-to-point communication. When the device is connecte

Products | 19-07-2017

The Texas Instruments LMV722-Q1 device is a low-noise, low-voltage operational amplifier (op amp) that can be designed into a wide range of applications. The device has a unity-gai

Products | 18-07-2017

This 20V, 990mohm, N-Channel FemtoFET MOSFET, from Texas Instruments, is designed and optimized to minimize the footprint in many handheld and mobile applications. The device’s

Products | 17-07-2017