New high-performance 2.5V to 18V hot swap and ORing controller
05-05-2015 |
Texas Instruments
|
Power
The new TPS2474x from Texas Instruments (TI) is an integrated ORing and hot
swap controller for 2.5V to 18V systems. The device's precise and
programmable protection settings aid in the design of high-power
high-availability systems where isolating faults is critical.
Programmable current limit, fast shut down, and fault timer protect the load
and supply during fault conditions such as a hot - short. The fast shutdown
threshold and response time can be tuned to ensure a fast response to real
faults, while avoiding nuisance trips. Programmable safe operating area
protection and the inrush timer keep the MOSFET safe under all operating
conditions.
After asserting a power good, TPS2474x runs the fault timer during
over-current events, but doesn't current limit. It shuts down after the
fault timer expires. Two independent timers (inrush / fault) allow the user
to customize protection based on system requirements. The ORing function of
the TPS2474x allows the user to program the reverse voltage threshold and
response time to aid in the design of redundant power supply systems, says
the company.