Design kit for protecting DC bus, data and high-speed ports from ESD surges

Stocked by Mouer, Bourns PN-DESIGNKIT-56 USB 3.1 PortNote Solution Design Kit shows an ultra-low capacitance six-channel TVS and steering diode array for protecting the DC bus, data, and high-speed ports from up to 10KV contact electrostatic discharge (ESD) surges. This solution also recommends a 2A 1206-sized polymeric PTC resettable fuse for overcurrent protection of the DC bus, as recommended by the USB 3.1 standard. USB 3.1 ports at 10Gbps are twice as fast as USB 3.0 ports, enhancing consumer applications requiring low latency high bandwidth. The USB 3.1 standard section 6.1 recommends that power and signal lines receive ESD protection, while section 11.4.1.1 also requires that hosts and self-powered hubs have time delayed overcurrent protection, such as polymer PTC devices. Included in the kit, the CDDFN10-0516P ultra-low capacitance TVS diodes with ultra-low inter-channel capacitance minimise crosstalk with up to 10kV contact ESD protection per IEC 61000-4-2 in one package for a single solution. The ultra-compact MF-NSMF200 PPTC resettable fuse package with low resistance minimises voltage drop at maximum current. The trip current of 4A ensures no inrush tripping.