New smart charger for NiMH and NiCD batteries
14-10-2016 | Powersolve | Power
From Powersolve, a new smart charger for NiMH and NiCD batteries will auto
detect and charge 8 to 15 cells in series and charge them at the correct
voltage between 9.6V and 18VDC.
The PSCH30 charger operates from a universal 90 to 264VAC and incorporates
several safety features including automatic cut-off when the cells are fully
charged and battery over-temperature protection using a thermal sensor.
Over-voltage and short-circuit protection are also standard. A switch allows
users to select the charge current between 0.9A to 1.8A while charging
status is indicated by LED.
Housed in a compact, desk-top plastic enclosure (120mm x 60mm x 38mm), the
PSCH30 is supplied as standard with an IEC320 C14 3 pin AC input connector
while the output lead is 1.2m, terminated in a 4-pin Toby KPPX-4P connector.
In addition, the company offers a variety of optional output connectors.
The CE marked PSCH30 meets all relevant safety and EMC standards including
UL1310, CISPR22 'B', FCC Part 15 'B' and EN55022 'B', says the company.
By Electropages
