Economical panel-mount keylock switches introduced

Saelig Company, Inc. announces two new ranges of Lorlin Electronics 250V-rated, panel-mount keylock switches, the DBSL and DSSL series, newly-designed to cost approximately 40% less than the existing DSL range but with the same quality.

The economical DBSL and DSSL series of power switches are 19mm (0.75”) two-position two-pole line/mains-rated, dimpled, and high-security. They have two positions with 90° indexing. Key-out may be in one or both positions. The switch module on the models is ENEC approved to EN61058-1 by VDE. The switches are available in same-key version or with 1000 different dimpled key combinations. The key lock features seven discs.

The Switch Rating for both series is 4/80A @250VAC with a life of >15,000 cycles. Proof Voltage is specified at 3kV min (initial), and the series is created for an operating temperature from -25C to +85C. Insulation Resistance is specified as >999MOhm @ 500VDC.

The series can be employed with panels of thickness up to 3mm (0.12”) with a standard drive shaft, but longer drive shafts are available for thicker panel fixing. The DBSL series is a bracketed fit version and the DSSL series is a snap-fit version. Both versions are customisable to suit product needs.