Design & Manufacture


PIN diode designed for low distortion attenuator applications

Avago's new HSMP-3810-TR1G 1A, 100V 3-pin PIN diode is now available from RS Components. The HSMP-381x series is specifically designed for low distortion attenuator applications. The devices feature ultra-low parasitic inductance in the

RS Components | 08-06-2015

Comprehensive selection of position sensors for harsh environments

Vishay MCB Sfernice position sensors for harsh environments are now available from TTI. Well established in the transportation industry, the series offers resistance to vibrations, shocks, and humidity to increase the performance and th

TTI Europe | 08-06-2015

Low-power development kit for TI's DaVinci / Sitara processors and Logic PD SOM

Now stocked by Digi-Key, the Logic PD Zoom DM3730 Torpedo development kit is a low-power, high-performance application development kit for evaluating the functionality of Texas Instruments' (TI) DaVinci DM37x and Sitara AM37x processors

Digikey | 08-06-2015

Two reference design kits for Bluetooth smart applications

Cypress Semiconductor has announced the availability of two reference design kits (RDKs) based on its PRoC BLE Programmable Radio-on-Chip solution for Bluetooth Smart applications. The new CY5672 PRoC BLE Remote Control RDK and CY5682

Cypress | 08-06-2015

MEMS development platform combines comms, sensor and development technologies

Created by linking the Cinterion Concept Board by Gemalto to an STMicroelectronics NUCLEO expansion board - Anglia Components has announced a new evaluation platform for MEMS and environmental sensors. Using source code supplied by Ang

Anglia | 08-06-2015

Development platform released for Cortus APS processor IP cores

Cortus has announced the availability of a development platform for its APS processor cores. The Cortus Development Platform comprises a board based on a Xilinx Spartan-6X75, the Cortus Eclipse IDE and Cortus GCC toolchain. The board includ

Cortus | 08-06-2015

New 8-port IO-link reference design kit speeds network development

Linear Technology has introduced an IO-Link (IEC 61131-9) reference design kit, which includes the DC2228A 8-port IO-Link master and DC2227A IO-Link device reference designs. With over 2.19 million IO-Link nodes installed worldwide, the gro

Linear | 08-06-2015

New SuperSpeed IC and development solutions boost USB3.0 portfolio

RS Components has announced it is now shipping FTDI's latest USB3.0-to-FIFO solutions, including ICs and development boards, for projects that demand SuperSpeed data transfer. The FT600Q bridge ICs enable USB3.0 SuperSpeed and USB2.0

RS Components | 04-06-2015

IPv6 Bluetooth Smart IoT development kit comes cloud connected out-of-box

Nordic Semiconductor has announced that after a successful Kickstarter campaign that far exceeded its original funding target, an IPv6 compatible Bluetooth Smart (formerly known as Bluetooth low energy) Internet of Things (IoT) development

Nordic | 03-06-2015

Evaluation platform for the ATSAMV71Q21 and other Atmel ARM Cortex-M7-based MCUs

Atmel's SMART SAM V71 Xplained Ultra evaluation kit is now available from Digi-Key. The hardware platform is designed to evaluate the ATSAMV71Q21 and other Atmel ARM Cortex-M7-based microcontrollers Atmel's SMART ARM-based automotive

Digikey | 03-06-2015

New Ethernet switch family supports increased capacity and port configurations

Microsemi has announced it will be unveiling a new member of its SparX-IV enterprise Ethernet switch product family, the VSC7449 offers significantly higher switching capacity and competitive port configurations. The new SparX-IV enterpris

Micrel Semiconductor | 01-06-2015

Cost effective module provides data and power isolation in critical USB environments

Murata has introduced the NMUSB202MC, a competitively-priced surface-mount powered data isolator module that conveniently provides dual port USB data and power isolation from a single upstream port with full power (500mA) available from eac

Murata | 01-06-2015

Integrated development platform supports SAM L21 Xplained Pro

Mouser now stocks the Atmel SAM L21 Xplained Pro evaluation kit which is designed to evaluate the ATSAM21J18A microprocessor. The Atmel Studio integrated development platform supports the SAM L21 Xplained Pro and explains how to integrat

Mouser Electronics | 29-05-2015

DIDO system based on modules based on TI DaVinci DM814x MCUs

Available now from Mouser, DAVE Embedded Systems DIDO system on modules (SoM) are based on TI DaVinci DM814x MCUs and feature 2GB of DDR3 SDRAM. The integrated PCI Express interface allows for a wide variety of peripheral connections. Th

Mouser Electronics | 29-05-2015

Articles