Subs & Systems


Versatile smart panel PC with face recognition now available

Rutronik UK now stocks the Smart Panel PC MM8 from Holitech offering intelligent face recognition and sensor-controlled temperature recording. A versatile, simple solution, the device combines easily into existing systems, allowing companie

Rutronik | 01-12-2020

Highly flexible UV curable adhesive meets ISO 10993-5 standard for cytotoxicity

Master Bond UV15X-6Med-2LV is a UV curable, non-cytotoxic adhesive featuring optical clarity and abrasion resistance. Not only can it be employed for bonding, but it can also be used for sealing, coating and encapsulating purposes. It offer

Masterbond | 30-11-2020

New front-end module is ideal for IoT applications

Skyworks has introduced the SKY66121-11, a high efficiency, high performance transmit/receive front-end module that offers greater than four times range extension. The device provides low power consumption and allows fast switch timing in a

Skyworks | 30-11-2020

CompactPCI processor board offers better performance and security

Concurrent Technologies has released a further 6U CompactPCI processor board from its product roadmap. PP F84/m3d is offered to customers who require better performance and security as well as those wanting to boost the life of current depl

Concurrent | 27-11-2020

New series of antennas for utility applications in the toughest conditions

KP Performance Antennas now offers a new line of Yagi antennas that are excellent for utilities, oil and gas, LoRa, SCADA, RFID and inventory tracking. This new line of antennas comprises five high-quality models that are designed for ut

KP Performance Antennas | 26-11-2020

New monitors offer high colour accuracy and enhanced connectivity

ViewSonic Corp has introduced two new Pantone validated monitors to the ColorPro VP68a Series, comprising the VP2768a (27”) and VP2468a (24”). Both are supplied with out-of-box colour accuracy, colour blindness modes, and USB-C one-cable so

ViewSonic | 26-11-2020

3D printer makes printing more accessible than ever before

Crowd Supply has announced the launch of the Lite3DP S1 resin micro 3D Printer. The printer is based on an Arduino board and uses mask stereolithography (MSLA) technology to deliver a lightweight, noiseless, low-cost 3D printing solution. T

Crowd Supply | 26-11-2020

RTOS transforms 64-bit SoCs into single-chip computers

SEGGER has revealed that its embOS real-time operating system now supports 64-bit processor cores. With the RTOS, users can now effortlessly upgrade to 64-bit systems while continuing to operate the same application software as deployed

Segger | 25-11-2020

Compact multiband LTE dipole antenna supports band 71

Raltron has released a multiband LTE dipole antenna that covers the whole LTE frequency band in a compact form factor. Mainly employed as an LTE relay or booster, the RDP-MBD Series stub antenna supports frequencies as low as 600MHz up to 5

Raltron | 24-11-2020

Embedded platform provides excellent performance and connectivity

Advantech has launched three new embedded computing platforms featuring Intel Atom x6000 Series and Intel Pentium and Celeron N and J Series processors. These platforms - the company's SOM-2532 computer on module, AIMB-218 industrial mother

Advantech | 20-11-2020

New building dedicated to customer service

Mouser has announced the opening of its new Customer Service Centre building at its corporate headquarters, dedicated completely to customer service and support. “Mouser has been fortunate to see strong growth over the last several years

Mouser Electronics | 19-11-2020

Much more power on a smaller footprint

Congatec has broadened the application areas of its AMD Ryzen Embedded processor-based COM Express Type 6 platforms towards smaller but more powerful system designs by launching the new AMD Ryzen Embedded V2000 processor recently released o

Congatec | 19-11-2020

Accelerator module performs high-speed inferencing for ML models

Coral Surface Mount Accelerator Module with Edge TPU, available now from Mouser, is a multi-chip module (MCM) developed to perform high-speed inferencing for machine learning (ML) models. It comprises the Edge TPU ML accelerator with integr

Mouser Electronics | 16-11-2020

Thermal hygrometer for guitar maintenance and safety

Together with Lee Guitars and Qingping, Sensirion AG has launched what is claimed to be the first thermal hygrometer for guitar safety. Furnished with the SHTC3 sensor from Sensirion AG, the thermo-hygrometer enables the maintenance of any

Sensirion | 16-11-2020

Articles