Texas Instruments


Tiny converter offers excellent efficiency and high-performance features

The Texas Instruments TPS62866 is a high-frequency synchronous step-down converter with an I2C interface that helps users reduce power supply and solution size, providing excellent

Power | 30-12-2019

Load switches provide robust protection against fault cases

Texas Instruments TPS22948 Load Switches offer robust protection against fault cases with output current limiting, reverse current blocking, and thermal shutdown. The switch ON sta

Connectors, Switches & EMECH | 20-12-2019

Automotive D-type flip-flops can convert a momentary switch to a toggle switch

Texas Instruments SN74HCS72-Q1 Automotive D-type Flip-Flops comprise Schmitt-triggers, providing for noisy or slow input signals. A low level at the preset (PRE) input fixes the ou

Automotive & Transport | 19-12-2019

Higher battery capacity and longer life for small medical and personal electronics

The Texas Instruments BQ25619 supports a termination current of 20mA and enables 7% higher battery capacity and longer run time, in comparison to other devices in the industry. The

Power | 17-12-2019

Charging port controller gives reliable on-the-road charging

Texas Instruments' new TPS25831-Q1 integrates a synchronous buck regulator, programmable voltage droop compensation and intelligent thermal management into an efficient Type-C port

Automotive & Transport | 16-12-2019

Step-down converter provides an efficient and high power-density solution

The Texas Instruments TPS62864/6 devices are 5.5V, 6A synchronous step-down converters with I2C interface measuring only 1.05mm x 1.78mm WCSP package. These high-frequency synchron

Power | 13-12-2019

FET-input op-amp delivers significant performance enhancements

The Texas Instruments OPA810 is a single-channel, FET-input, voltage-feedback operational amplifier with bias current in the pA range. The device is unity-gain stable with a

Power | 12-12-2019

Delta-sigma ADC with PGA and AC excitation

The Texas Instrument ADS1235-Q1 is a precision, 7200-SPS, delta-sigma ADC with an integrated PGA. This device also incorporates diagnostic features such as PGA overrange and refere

Automotive & Transport | 11-12-2019

Repeater evaluation module allows for easy evaluation of linear repeater

Texas Instruments DS280MB810EVM EVM enables easy evaluation of the 28Gbps eight-channel linear repeater with crosspoint, DS280MB810. To utilise this evaluation module, supply power

Design & Manufacture | 10-12-2019

Serializers aid cost-effective automotive applications

Texas Instruments DS90UB949A-Q1 2K HDMI-to-FPD-Link III Bridge Serializers provides one-lane or two-lane high-speed serial streams over cost-effective, 50Ohm single-ended coaxial,

Automotive & Transport | 09-12-2019

Development kit offers a common and easy-to-use environment

Texas Instruments LAUNCHXL-CC26X2R1 LaunchPad Development Kit supports evaluation of both the SimpleLink Bluetooth low energy CC2642R wireless MCU and the SimpleLink Multi-Standard

Development Boards | 06-12-2019

Power management ICs offers an automotive application solution

Texas Instruments TPS650002-Q1 SVS Power Management ICs connect a single step-down converter with two low-dropout regulators, producing an automotive application solution. The 2.25

Automotive & Transport | 05-12-2019

Isolated gate drivers effectively drive IGBTs and SiC power FETs

Texas Instruments UCC23313 Isolated Gate Drivers are created for IGBTs, MOSFETs and SiC MOSFETs, with 4.5A source, a 5.3A sink peak output current, and a 3.75kVRMS basic isolation

Power | 04-12-2019