Texas Instruments


Smart gate drivers ideal for 12V and 24V automotive motor-control applications

Texas Instruments DRV8340-Q1 Automotive 6V to 60V three-phase Smart Gate Drivers give three half-bridge gate drivers, each able to drive high-side and low-side N-channel power MOSF

Automotive & Transport | 01-08-2019

Highly-integrated boost-mode battery charger enables instant power on

Texas Instruments bq25886 Boost-Mode Battery Charger is a highly-integrated battery charge management and system PowerPath management IC. This device facilitates instant power on a

Power | 31-07-2019

Battery charger evaluation module facilitates high efficiency and high-accuracy voltage regulation

Texas Instruments bq25886EVM Battery Charger Evaluation Module is used for the evaluation of the bq25886. The bq25886 is a highly integrated 2A boosting, 1.5MHz switch-mode battery

Design & Manufacture | 30-07-2019

Charger evaluation module is a complete charger package

Texas Instruments bq25887EVM Charger Evaluation Module (EVM) is a comprehensive charger module for evaluating the bq25887, an I2C controlled, 2s battery NVDC charger in the QFN pac

Design & Manufacture | 26-07-2019

Serialisers support ADAS through advanced data protection and diagnostic features

Texas Instruments DS90UB953A-Q1 FPD-Link III 4.16Gbps Serialisers is created to support high-speed raw data sensors including 2.3MP imagers at 60fps and as well as 4MP, 30fps camer

Test & Measurement | 25-07-2019

Two-channel precision analog switch for use in medical equipment and industrial systems

Texas Instruments TMUX1136 2:1 Two-Channel Precision Analog Switch is a CMOS single-pole double-throw (2:1) switch with two independently controlled channels. Broad operating suppl

Connectors, Switches & EMECH | 24-07-2019

LDO linear regulator is an optimal solution for powering microcontrollers

Texas Instruments TPS7B81-Q1 Low-Dropout (LDO) Linear Regulator is created for up to 40V VIN applications. With only a 2.7µA typical quiescent current at light load, the device is

Power | 23-07-2019

MOSFET and GaN FET driver for high-frequency applications

The Texas Instruments LMG1210 200V half-bridge MOSFET and GaN FET driver is part of their GaN power portfolio family. The device facilitates higher efficiency, increased power dens

Power | 22-07-2019

Automotive window supervisor for systems that operate on low-voltage supply rails

Texas Instruments TPS3703-Q1 Automotive High-Accuracy Window Supervisor is ideal for systems that operate on low-voltage supply rails and have narrow margin supply tolerances. The

Automotive & Transport | 19-07-2019

Gate driver evaluation module is ideal for sensorless BLDC algorithms

Texas Instruments BOOSTXL-DRV8320RS Gate Driver Evaluation Module is a 15A, three-phase brushless DC drive stage based on the DRV8320RS gate driver and CSD88599Q5DC NexFET power bl

Design & Manufacture | 18-07-2019

High-speed signal conditioner compensates for AC and DC loss in the transmission channel

Texas Instruments TUSB217-Q1 USB 2.0 High-Speed Signal Conditioner is intended to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transm

Semiconductors | 17-07-2019

Operational amplifier is ideal for wideband transimpedance circuits

The OPA855 decompensated amplifier from Texas Instruments is intended as a wideband, low-noise, bipolar-input operational amplifier. The device shines in high bandwidth transimpeda

Power | 16-07-2019

Buck converters provide tight power specification for noise sensitive applications

Texas Instruments TPS65653-Q1 Dual High-Current 3A Buck Converters offer a tight power specification for noise sensitive applications. The device offers two step-down DC-DC convert

Power | 15-07-2019