Connectors, Switches & EMECH


New sealed connector system offers increased reliability and protects against water and dirt

Molex offers the new Squba 1.8mm-Pitch Sealed Wire-to-Wire Connector System, created to fit in small spaces and afford protection against dust, liquid and dirt. The connectors carry up to a 6A current and give an IP67 NEMA rating on the sea

Molex | 27-04-2018

D-Sub for medical devices features electric shock prevention

JAE has developed the D-Sub type DA-15PF-N-ME, featuring electric shock prevention with a resin-insulated pin contact. It is available now from TTI Europe. This device is compatible with IEC60601-1 3rd Edition clause 8.5.2.3, specific t

TTI Europe | 25-04-2018

Displacement connectors deliver high-reliability in space-constrained applications

AVX Corporation has a new 9176-800 Series low-profile insulation displacement connectors (IDCs), reducing the Z-axis height of the next-lowest-profile insulated IDC connector, the 9176-400 Series, by 1mm, and reduce the whole overall volum

AVX | 24-04-2018

Cable mount circular connector plug designed for outdoor applications

The LEMO T Series range are small diameter waterproof push-pull multipole connectors with an index protection of IP68. The connectors have been specifically designed for outdoor applications. They are available now from RS Components. They

RS Components | 23-04-2018

Fine-pitch SMT board-to-board connectors for tight-packaging applications

Available from TTI Europe and ideal for tight-packaging applications such as mobile phones, the SlimStack fine-pitch connectors provide a broad selection of low-profile, narrow width options in various stack heights and circuit sizes for sa

TTI Europe | 19-04-2018

New MMIC switches for high-performance defence and instrumentation applications

Custom MMIC continues to rapidly add to its extensive family of MMIC Switches; with two new GaAs MMIC switches, the non-reflective CMD235C4 and CMD236C4. The CMD235C4 is a DC-18GHz broadband MMIC SP5T switch offering broadband performan

Custom MMIC | 18-04-2018

New connectors for the medical market provide a reliable interconnect system

The Eclipta connector series, available now from TTI Europe, addresses the medical market need for a reliable interconnect system with short lead-time and minimal cost. The connectors have a simple push-button active latch preventing inadve

TTI Europe | 17-04-2018

Rugged SMD LED displays for multiple industrial and laboratory applications

JPR Electronics supplies a broad range of Kingbright 7 segment single digit SMD LED displays. These displays are rugged, and white diffused with a grey face with coloured LED segments. The displays are typically used in industrial and h

JPR Electronics | 13-04-2018

New planform for connectors has been developed for high currents

Lane Electronics offers a new planform in its inventory of Weald Electronics’ LMH series MIL-DTL-26482 circular connectors. The new planform, 12-04, has four size 16 contacts and been developed following increased demand from customers

Lane Electronics | 13-04-2018

Interlocking terminal blocks allow for great voltage clearance

The RS Components RS Pro CSTBP45VD Series PCB terminal block offers 3.5mm pitch vertical, through hole, eight-way, with 45-degree cable entry. The terminal blocks feature kinked pins providing PCB retention for 0.75mm2 (22-18AWG) solid

RS Components | 11-04-2018

Latest LEDs offer high density in a small surface

Mouser is now stocking Lumileds LUXEON CoB Core Range (Gen 4) LEDs. These LEDs provide high flux densities in a small LES, offering double the luminous flux of the third generation of LUXEON CoB Core Range devices. The high-density CoBs can

Mouser Electronics | 11-04-2018

Industrial poke-home connector available without a wire stop

AVX Corporation has released what is claimed to be the first industrial poke-home connector available without a wire stop. The new 2.5mm poke-home contact is the latest addition to its 70-9296 Series STRIPT insulator-less, single-position,

AVX | 11-04-2018

Ultra-compact fine pitch cable-to-board connector optimised for crowded PCBs

Harwin has continued to extend its interconnect solutions, and announces the latest addition to the M40 series. The series has phosphor bronze contacts rated for currents of up to 1A. These lightweight, low profile 1mm pitch units are the t

Harwin | 10-04-2018

High-frequency SMA plug offers high performance with optimised end launch design

Amphenol RF has added an end launch plug into its high-frequency SMA product line. Like their High-Frequency SMA End Launch Jacks, this plug offers exceptional VSWR performance up to 26.5GHz and features an optimised end launch design with

Amphenol | 06-04-2018

Articles